The Travel Logic Series of 4 GHz Logic Analyzers are small enough to fit into your shirt pocket, yet are truly sophisticated logic analyzers, capable of 4 GHz timing analysis, or 200 MHz state analysis, with up to 72 Mb total stackable memory for the 36 channels. They plug into a PC or Laptop USB port making them ideal for the field service technician or engineer, hopping from PC to PC, or taking with them for diagnosis on the road. Also remember that with USB, no additional power supply is needed ..... More Details

The DS-1000 series (DS-1002, DS-1102, DS-1202, DS-1302) is a PC-based, pocket-sized digital storage oscilloscope (DSO) with various high-end functions. It is designed to support analog signals measurement and to store the data easily. Its portability allows engineers to enjoy their presentation with great convenience and confidence. The DS-1000 series has up to 200MHz bandwidth, TV and External Trigger, RUN/STOP button and 20MHz bandwidth limitation functions. It is a tiny (135 x 80 x 26mm)  oscilloscope with memory size (64k/512k/2M points) to save more sampling data in Single-Shot. The ROLL mode allows users to see low speed and long time signals. The Log function records huge waveform data up to hard disk size in ROLL mode, or in Trigger or Interval Timer event. With a precision vertical resolution, 8bits in 2mV/DIV and 9bits from 5mV/DIV to 10V/DIV, the DS-1000 provides wide vertical range and detail signal curve. For DS-1202 (only), user may STACK 2/3 sets to expand to 4/6 channels respectively to measure more signals in synchronous time, such as some audio signals ..... More Details

The M3510A and M3511A 6 1/2 Digits Multimeters are the newest generation of DMMs from Picotest. These new DMMs offer compact size, light weight, fast measurement speed & throughput, expanded measurement functions, systematization capability and highly usable interfaces including a standard USB interface and an optional GPIB/RS-232 interface ..... More Details

The new Picotest G5100A Waveform Generator uses direct digital synthesis (DDS) techniques to create a stable, accurate output signal for clean, low distortion sine waves. The G5100A offers 10 standard waveforms and user defined arbitrary waveforms with 14 bits resolution. It also provides you 16 bits pattern out and a synchronized clock. Moreover, the external frequency references lets you synchronize to an external 10 MHz clock ..... More Details

The Picotest U6200A universal counter, whose production procedures conform to ISO 9004, has frequency resolution of 12 digits per second (Figure-1), 40 ps time interval resolution and a complete set of test and analysis features. The standard U6200A’s CH3 comes with the range from 375 MHz to 6GHz and the standard CH 1 & 2 from 1 mHz to 400 MHz ..... More Details

Following the successful launch of the tiny pen-style USBscope50 for high performance analysis in situations where portability is key, Elan Digital is adding three more members to the growing family of test equipment.

The USBwave12 is a high performance function generator with a 0 to 12.5Mhz frequency range with 0.2Hz resolution, and 0 to +/-10V amplitude range with a 20mV resolution as well as 0 to +/-10V offset range with 20mV resolution.

Next in the range is the USBpulse100, a pulse/clock generator with a 0 to 100MHz frequency range and square wave 50% duty output or variable duty cycle. It has continuous run or single pulse capability with pulse widths from 10ns to 10s.

Last but not least is the USBcount50, which is a frequency/period counter measuring frequencies from 0.1Hz to 50MHz and uses reciprocal counting for low frequencies. It has pulse width and duty cycle measurement with resolution of 20ns as well as data logging capability.

Along with the USBscope50, which offers the same small form factor with high performance normally associated with much larger bench type oscilloscopes, (such as 50Msps 8-bit single shot and 1Gsps equivalent time sampling) all the units' inputs feature 300V Cat II galvanic isolation from the USB port, thereby protecting your PC and its data.

All the units are all powered via the USB port and can be stacked together to provide either multi-channel instrumentation, or alternatively stacked in combination with the USBscope50 to provide multi-function capability. Each unit comes with its own software for Windows 98SE/2K/XP and Windows 7 (32 bit) and a free demo download of the USBScope50 is available HERE !